Industrial Cleaners Citri Power is a heavy duty emulsion degreaser.
Citri Power is used to
remove oils and greases, fuel stains, gummy deposits, asphalt and tar
residues. Citri Power is not corrosive to metal surfaces, but may act
upon some painted surfaces. Test surface prior to use for
compatibility. Citri Power should not be used on electrical
components. Citri Power contains no chlorinated hydrocarbons.
Physical State - Liquid
Color - Colorless to light yellow
Density - 7.27 lbs./gal.
Flash Point - 120° F (C.O.C.)
Citri Power may be
applied by brushing, spraying or soaking. Allow to act for thirty
minutes, then flush with either cold or hot water. For additional
information on product application, contact your Industrial Cleaners
Citri Power is a
combustible liquid. Store away from heat, open flame and ignition
sources. Do not mix with flammable solvents. Do not take internally.
Avoid contact with skin and eyes. Should contact occur, flush area
immediately with water. If any discomfort persists consult your
physician. Read relevant Material Safety Data Sheet before handling
Citri Power is
packaged in 55, 30, and 15 gallon non-returnable containers.