Powdered Detergent 6120 is a free flowing
alkaline powder designed for use as a high pressure batch or continuous
conveyorized degreaser. When used as directed, formula 6120 will remove
oils, greases and associated soils from a variety of metal surfaces.
Physical State: Powder
pH (1% Solution): 12.0
Solutions of Powdered Detergent 6120 foam slightly at room
temperature. Above 130° F, this foaming tendency subsides and a
defoaming mechanism comes into play. Lack of foam in a high pressure
recirculated cleaning machine is important. Solutions of 0.50% to 4.0%
of formula 6120 should be produced in the washer. Spray nozzles should
be in good condition such that they will apply maximum impingement of
the cleaning solution on the soil.
Following cleaning, rinse with plain water. All metals of
construction can be cleaned with formula 6120. However, soft metals
such as aluminum and zinc should not be exposed to very strong
solutions of 6120 for extended periods of time at high temperatures.
For additional information on product application, contact your
industrial cleaners.com representative.
Powdered Detergent 6120 is an alkaline material. Do not take
internally. Avoid contact with skin and eyes. Should contact occur,
flush immediately with large amounts of water. If any discomfort
persists, seek medical attention. Read relevant Material Safety Data
Sheet before handling this product.
Powdered Detergent 6120 is authorized by the USDA for use in
federally inspected plants.
Powdered Detergent 6120 is packaged in 400 lb., 300 lb. and 100 lb.