3110 Desription

Home Up Site Map Newsletter Info Request Search Page





Drain Cleaner 3110

Our 3110 is a blend of highly active, broad spectrum bioactive cultures that have the ability to digest and liquefy organic wastes.  Our 3110 is designed for use in all sewage systems, lagoons, sink drains and traps, and grease traps.


- A select blend of highly active bacterial cultures

- Cultures grow in either the presence or absence of air

- Good stability and long shelf life

- Rejuvenates system rapidly, reduces Biological Oxygen 


- Non-volatile and non-corrosive, easy to handle and blend

- Each batch tested and standardized for a high level of



Physical State - Free flowing powder

Appearance - Tan

Odor - Yeast-like

Screen Mesh Size - 95% through 10 mesh

pH - 6.0 - 7.5


Bacteria Count - Min. Aerobic - 350 million/gram minimum

                             Min. Anaerobic - 175 million/gram            



Enzyme Activity - Protein splitting (Proteases)

                              7,000 PV units minimum

                              Starch splitting (Amylases)

                              600 - 800 DV units minimum


Bacteria and enzymes in 3110 perform within a pH range between 5.5 and 8.0 with the optimum near 7.0.  Temperature affects the activity of the working solution and acting increases with rising temperatures up to 120*F (49*C).  No activity can be expected below 40*F (5*C).


Area of Treatment 3110 Frequency
Kitchen drain 1/4 cup Twice weekly
Laundry drains 1/2 cup Twice weekly
Bathroom drains 1/4 cup Weekly
Toilets 1/4 cup Weekly
Grease Traps 1/2 cup/5 gal. capacity Weekly
Septic Tanks 1/2 cup/500 gal. capacity

1/4 cup/500 gal. capacity

First week

Weekly maintenance

Lagoons 10-25 lbs./acre surface

1-2 lbs./acre surface

First day

Weekly maintenance

(1) Activated Sludge 20-50 lbs./1000 gallons

2-5 lbs./1000 gallons

Daily first week

Weekly maintenance

(2) Trickling Filter 25 lbs./1000 gallons

2-5 lbs./1000 gallons

Daily first week

Daily maintenance

To obtain faster biological action, presoak 3110 in warm water 75-85*F (25-30*C) for 6 to 10 hours before using.  For additional information on product application, contact your Industrial Cleaners representative.


Avoid breathing dust from 3110.  Do not take internally.  Avoid contact with skin and eyes.  Should contact occur, flush immediately with water.  If any discomfort persists, seek medical attention.  Read relevant Material Safety Data Sheet before handling this product.


Our 3110 is packaged in 10 lb., 25 lb., and 50 lb. poly pails; 100 lb. and 300 lb. fiber drums.

Click here to order!




Click here if you are interested in receiving our monthly electronic newsletter.

      Copyright 2008 DB Water Technologies, LLC. All rights reserved