Stripper 3108 CID may be brushed or sprayed (with airless equipment) onto
the surface of the coating to be removed. Allow to stand for 15 to 45
minutes, depending upon the thickness of the coating to be removed.
Remove by scraping, brushing or high pressure rinsing.
Stripper 3108 CID is a dangerous material containing Methylene Chloride.
Do not take internally. Avoid skin and eye contact. A face shield or
chemical goggles and Viton®1
gloves should be worn when handling this product. Should contact occur,
immediately flush area with large amounts of cold water. If any
discomfort persists, seek medical attention. Read relevant Material
Safety Data Sheet before handling this product.
Stripper 3108 CID is highly volatile. Bungs must be opened slowly to
purge accumulated vapors. Evaporation retarders are incorporated into
the formulation. Never use Stripper 3108 CID in a confined area unless
adequate ventilation is present or a self-contained breathing apparatus
Stripper 3108 CID is packaged in 55, 30 and 15 gallon non-returnable
is a registered trademark of DuPont Eastover's LLC.