Inhibited Sulfamic Acid 3102 MO is a powdered sulfamic acid blend with
corrosion inhibitors and wetting agents designed for cleaning heat
transfer surfaces. Additionally it protects galvanized metal surfaces
Inhibited Sulfamic Acid 3102 MO is used as a descaler when the
surfaces to be cleaned are galvanized. Formula 3102 MO is inhibited to
protect galvanized metal surfaces from corrosion during the cleaning
process. Formula 3102 MO can be used to clean a cooling water system
while in operation. Optimum results are obtained when cooling water is
heated to 95° or above.
Physical State: Powder
pH (1% Solution): 1.3
For cleaning, maintain between a 5% to 10% solution or 40 to 80
pounds of Inhibited Sulfamic Acid 3102 per 100 gallons of water in the
system. For additional information on product application, contact
your industrial cleaners.com representative.
Inhibited Sulfamic Acid 3102 MO and its solutions are strongly acidic.
Do not take internally. Avoid contact with skin and eyes. Should
contact occur, flush immediately with large amounts of water. If any
discomfort persists, seek medical attention. Read relevant Material
Safety Data Sheet before handling this product.
Inhibited Sulfamic Acid 3102 MO is packaged in 400 lb., 300 lb. and
100 lb. non-returnable containers.