 |
|
|
Inhibited Sulfamic Acid
3102
| Inhibited Sulfamic Acid 3102 is a powdered sulfamic acid blend with
corrosion inhibitors and wetting agents designed for cleaning heat
transfer surfaces. Additionally it protects galvanized metal surfaces
during cleaning. USES
Inhibited Sulfamic Acid 3102 is used as a descaler when the
surfaces to be cleaned are galvanized. Formula 3102 is inhibited to
protect galvanized metal surfaces from corrosion during the cleaning
process. Formula 3102 can be used to clean a cooling water system
while in operation. Optimum results are obtained when cooling water is
heated to 95° or above.
PRODUCT DESCRIPTION
Physical State: Powder
Color: Off white
pH (1% Solution): 1.3
DOSAGE
For cleaning, maintain between a 5% to 10% solution or 40 to 80
pounds of Inhibited Sulfamic Acid 3102 per 100 gallons of water in the
system. For additional information on product application, contact
your industrial cleaners.com representative.
HANDLING
Inhibited Sulfamic Acid 3102 and its solutions are strongly acidic.
Do not take internally. Avoid contact with skin and eyes. Should
contact occur, flush immediately with large amounts of water. If any
discomfort persists, seek medical attention. Read relevant Material
Safety Data Sheet before handling this product.
PACKAGING
Inhibited Sulfamic Acid 3102 is packaged in 400 lb., 300 lb. and
100 lb. non-returnable containers.
Click here
to order!
|
|
 |
| |
|
Click here if you are interested in receiving our monthly electronic newsletter. |
|
|
 |
|
