3100 Description

Home Up Site Map Newsletter Info Request Search Page

Home
Up

 

007
3100
3101
3102
3102 MO
6105

   

Sulfamic Acid 3100

Sulfamic Acid 3100 is a powdered sulfamic acid blend with wetting agents designed for cleaning stainless steel and non ferrous heat transfer surfaces.

USES

Sulfamic Acid 3100 is used as a descaler for either boiler water, cooling water or heat exchange systems. Formula 3100 can be used to clean a cooling water system while in operation or the condenser can be isolated. Optimum results are obtained when boiler water is heated to 120-150 F for on-line cleaning.

PRODUCT DESCRIPTION

Physical State: Powder
Color: Off white
pH (1% Solution): 1.3

DOSAGE

For cleaning, maintain between a 5% to 10% solution or 40 to 80 pounds of Sulfamic Acid 3100 per 100 gallons of water in the system. For additional information on product application, contact your industrial cleaners.com representative.

HANDLING

Sulfamic Acid 3100 and its solutions are strongly acidic. Do not take internally. Avoid contact with skin and eyes. Should contact occur, flush immediately with large amounts of water. If any discomfort persists, seek medical attention. Read relevant Material Safety Data Sheet before handling this product.

PACKAGING

Sulfamic Acid 3100 is packaged in 400 lb., 300 lb. and 100 lb. non-returnable containers.

Click here to order!

 

 
Did You Know...

Stainless steel and heat transfer surface descaler.

Sulfamic Acid 3100 is great for cleaning stainless steel heat transfer surfaces!

Click here if you are interested in receiving our monthly electronic newsletter.

 
Home
      Copyright 2008 DB Water Technologies, LLC. All rights reserved